Online Cloud Security Logo mobile

How to Hide Camera Wires Outside – Complete Guide

Dave Miller with Online Cloud Security

Dave Miller – Tech Enthusiast & Security Expert – September 26th, 2022

how to hide camera wires outside

Even if there are many possibilities for indoor camera cables, it might be difficult if you don’t know How to Hide Camera Wires Outside. Any home security camera installation calls for the technical know-how and specific tools. You may have already considered all the alternatives, but thankfully there are still more options.

The techniques I’ll go through are quick and low-cost options for you to cover the cables for your security cameras outside. Additionally, no one wants their cables to ruin the appearance of their home, so hiding them is the most excellent approach to maintaining the aesthetics of your home.

Read on to learn why you should be cautious while handling your camera cables and how to conceal them successfully.

How to Hide Camera Wires Outside – Complete Guide

Wired Security Cameras

There are many various types of cameras, and among them, some include cables for their power source or internet connection. However, most of those in use today lean more toward wireless technology.

The wired smart home security cameras market continues to have the largest market share over the projected period, with a market value of USD 6.42 billion in 2021. Wires still have a long way to go with us, even if we get headed toward a wireless world.

Therefore, the wiring would still be an issue if you installed a CCTV camera. There are no concerns associated with using wired cameras. In contrast, having a wireless system ensures that your connection will be as reliable as possible with the fewest problems. Since wired cameras get connected to the part of your home, it is more challenging even to get damaged by someone.

Therefore, you must know how to hide camera wires outside whether you have any connected system with either older DVR or modern NVR systems.

How to Hide Camera Wires Outside - Methods

Given that you could have four cables or the number of wires could exceed ten when more cameras get installed. Ideally, you would like them to travel on at least one common path. Let’s go over the instructions on how to conceal camera wires outdoors below to assist you in how to hide camera wires outside.

Method #1: Disguise Your Wires in Plain Sight

Let’s start with the most straightforward step: concealing all your cables from view is the first thing you should do. Since most security camera wires are either white, gray, or black, they stand out to human eyes. 

Go to any nearby hardware store to get spray paint made specifically for plastics that will complement the aesthetics of your home with wire hues. The same color as the wall in the background should get used to shading them. Once you’ve decided on a hue, you may want to make small changes in how well they fit into their surroundings.

Note: You may purchase the cable covers and paint them if you don’t want to color the wires. Not only will this conceal the wires, but it will also prolong their life.

After you’ve finished painting, you may check it out or get feedback from others to make any required modifications while you wait for the paint to dry.

Method #2: False Ceiling or Drill Walls

If the wires are outside the home, you may conceal them through the fake ceiling and remain undetectable. This technique works well for covering and weatherproofing cables. You’ll need to drill holes in the walls and route the wires through them to conceal cables in your walls. The lines can also get sent through the ceilings or barriers to the desired location. If you want to get an idea of what type of ceiling I am talking about, you can visit the link below.

Ceiling Types >>

Note: To accomplish this procedure, which is more durable, you’ll need some tools and perhaps an electrician. If you decide to DIY, you’ll also need an electric drill and fish tape as well.

Finding the opening in your ceiling should be your first task. Because with it, you can avoid drilling through your building’s walls.

Method #3: Use Hangings as Your Advantage

There can be a lot of hangings throughout the house. To prohibit any person from seeing the cables. By installing around these hangings, you may conceal the wiring. It would make the hangings appear at first glance rather than the wires. It offers you a practical technique to ensure that nobody can see your cables wherever they are.

Method #4: Burying the Cable

Additionally, you may use your lawn to hide the cables where they cross it. The method could be complicated or possibly not suitable for everyone. But if you can, just cut a groove in the sod with a flat-nosed shovel and pull it back. Additionally, bury these cables at least 6 inches deep to prevent damage from grass aeration. It is a safe and effective method, but excavating will demand the necessary work.

At the end of the post, I also mentioned several low voltage wiring standards and codes. Keep those in mind if you opt for this method for how to hide camera wires outside.

Note: Based on the rating, direct burial-rated cables can get buried without further protection.

Wireless Camera Setups

Not everyone would agree that the expertise and effort required to install a wired camera system is reasonable. Since there might not be as many options for hiding a cable outside your house as inside. However, while being inexpensive procedures, they all demand a lot of work. Therefore, if you don’t want to embark on any adventure, get a wireless security camera instead.

The wire-free security cameras might benefit you in different ways without requiring any more work on your part. Today’s wireless cameras typically include battery alternatives, and these lithium batteries have a long lifespan. Additionally, consider conducting extensive research before purchasing a wireless system because not all devices with a wireless label are wireless. Wireless security cameras are more secure if set up and cared for properly.

Wiring Code Standard

Structured cabling refers to the support system for low voltage wiring. Most of a home’s wiring gets designed on a different network than a structured wiring system. Therefore, your home will likely not already have every type of wiring for a low-voltage fixture.

The ideal practice is to adhere to the wiring standards for all devices. Because your wires get exposed to the elements, not every parameter will be under your control. Thus, it would help if you remembered the essential precautions to keep yourself and those wires secure.

The National Electrical Code has a considerable volume of information regarding standards. It specifies national wiring rules for every space and gets frequently cited by licensed electricians. In practice, some more standards are followed worldwide among different countries. Typically, there are just as many regulations governing circuits and equipment used outside as indoors. Below are some of the precautions you should keep in mind,

Codes To Remember

How to Hide Camera Wires Outside: Bottom Line

Having a security camera is a must nowadays, considering the stats. Wires for security cameras shouldn’t be exposed since burglars may cut off the transmission leaving you vulnerable. It may be difficult to conceal the camera cables depending on your house space. While it might not be challenging for everyone, it feels like a challenging, intricate process for some people.

Making security camera cables outdoors blend in with the surroundings by painting them the same color as the walls is still the simplest method to do it. By doing this, the wiring for the security cameras will be more complicated for intruders to see from a distance.

You should contact a professional if you cannot use this or other methods. Depending on your space scenario, they can provide the appropriate measure with their professional instruments. It’s preferable to pay once than to deal with wiring problems with your perhaps pricey camera equipment afterward. Most businesses now provide expert installation services; some even do so when you sign up for subscription programs.

**Onlinecloudsecurity.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to Amazon.com and affiliated sites. As an Amazon Associate we earn affiliate commissions from qualifying purchases.**

Dave Miller with Online Cloud Security

Dave Miller

IT Consultant at Online Cloud Security

Dave Miller is an IT Consultant for Online Cloud Security and has over 7 years of experience in the Information Technology space. He also specializes in repairing laptops & computers. In his spare time, he loves to talk about new technologies and hosts monthly IT and Cyber Security meetings in the Houston area.

Popular Reads:

Related Articles:

Share This Article with Your Friends!

Click any button down below to share this article on the following channels:

Facebook
Twitter
Pinterest
Email
Online Cloud Security Logo (500x500px)

About Online Cloud Security:

Online Cloud Security is here to recommend you the most secure devices, from laptops to smartphones, we only want to provide you with products that we have tested and used ourselves for online security. Every product that we recommend is heavily inspected and tested for security against hackers, viruses, malware, and any other intruders that may want to steal your information. 

Recent Posts:

Online Cloud Security Logo (500x500px)

About Online Cloud Security

Online Cloud Security is here to recommend you the most secure devices, from laptops to smartphones, we only want to provide you with products that we have tested and used ourselves for online security. Every product that we recommend is heavily inspected and tested for security against hackers, viruses, malware, and any other intruders that may want to steal your information. 

Recent Posts: